Finishing die technology products and technology development focus
Time:
2023-06-27 12:06
Source:
1. Research on key technologies of design and manufacture of continuous precision die for complex parts
Complex parts continuous fine stamping die is the cutting-edge basic technology of fine stamping technology, which is the leading research, hoping to drive the whole fine stamping technology of our country to improve significantly. The key technology of precision die design and manufacturing is studied to realize the rapid improvement of precision die technology in China and shorten the gap with advanced countries as soon as possible by taking synchronous gear ring, clutch plate and longitudinal composite continuous precision die as a breakthrough.
2, fine stamping die life improvement and related key technology research
Die life is a comprehensive reflection of the level of die materials, small arts and supporting products. Taking the life of fine stamping die as the leader to carry out technical research can not only solve the problem that the life of fine stamping die is too low, but also drive the technological development of die materials, fine stamping process and supporting tooling and other auxiliary products.
3. Research and development of precision blanking - precision forging composite technology
Precision blanking and precision forging are two advanced manufacturing technologies developed in parallel. Precision blanking is too thick and requires precision forging, and precision forging is too thin and must be precision blanking. The basic idea of developing the forging and stamping composite process is to find the combination of the two processes (such as gear parts with hubs and CAM parts with short shafts), and China's forging has a long history, the level has been very high, and to improve the overall level of China's precision stamping technology is a good way.
Related news
Mold manufacturing/stamping die common fault analysis and solution
Stamping die is a special process equipment that processes materials into parts (or semi-finished products) in cold stamping processing, called cold stamping die (commonly known as cold stamping die). Stamping is a pressure processing method that uses a die mounted on a press to apply pressure to the material at room temperature to produce separation or plastic deformation, so as to obtain the required parts.
What are the general requirements of steel for plastic mold manufacturing
When pressing plastics, there are two types of substrates: thermosetting plastics and thermoplastic plastics.
Finishing die technology products and technology development focus
Complex parts continuous fine stamping die is the cutting-edge basic technology of fine stamping technology, which is the leading research, hoping to drive the whole fine stamping technology of our country to improve significantly. The key technology of precision die design and manufacturing is studied to realize the rapid improvement of precision die technology in China and shorten the gap with advanced countries as soon as possible by taking synchronous gear ring, clutch plate and longitudinal composite continuous precision die as a breakthrough.
Hardware mold accessories grinding precautions
Grinding is a process that is often carried out after long-term use of hardware mold accessories. The abrasive particles embedded on the lashing tool will be polished on the surface of the workpiece during the grinding process. In the process of relative movement between the lashing tool and the workpiece, the rust on the surface of the hardware mold accessories and the damage will be gradually smoothed and become more smooth. After grinding process of hardware mold accessories in the service life will become longer, the processing effect will be more significant. So what do you need to pay attention to when grinding high-quality hardware mold accessories
The precision of the mold will be higher and higher
With the continuous development of the economy, people's living standards continue to improve, the spiritual and material cultural requirements are getting higher and higher, this demand also led to the continuous development and innovation of the home industry, the industry for home hardware demand is growing, home hardware industry shows different changes.
In addition to requiring high enough strength and toughness in the work of high-precision mold parts, its surface performance is crucial to the working performance and service life of high-precision mold parts. The improvement of these properties, relying solely on the improvement and improvement of the base material is very limited and uneconomical
Contact us
Contact: Miss Xiao
Phone: 13763290703
Tel: +86 0769-82759188
Email: yuan.xiao@meiya.ac.cn
Website: www.meiya.ac.cn
Address: No. 81, Wangsha Road, Hongmei Town, Dongguan City, Guangdong Province, China
Scan to identify concerns
Consultation